Overcenter Valve – Ziyacorp

Double overcenter valve, VBCD DE A CC , 60 L/min, G 1/2″ , VBCD 1/2 DE A CC V0423

theplanmaster — Thu, 30 Jun 2022 06:49:37 +0000

DOUBLE OVERCENTER VALVE FOR CLOSED CENTER
VBCD 1/2 DE A CC – V0423
Overcenter valves have great importance in hydraulic systems and have following features:
Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.
Load holding:
Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.
Load control:
Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.
Load safety:
These valves are used where there is vital importance in the system.
VBCD DE A CC series are ideal when other models can not operate properly. If the control valve is closed center, this valve will be a good choice.

Double overcenter valve, VBCD DE A CC , 40 L/min, G 3/8″ , VBCD 3/8 DE A CC V0421

theplanmaster — Thu, 30 Jun 2022 06:49:35 +0000

DOUBLE OVERCENTER VALVE FOR CLOSED CENTER
VBCD 3/8 DE A CC – V0421
Overcenter valves have great importance in hydraulic systems and have following features:
Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.
Load holding:
Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.
Load control:
Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.
Load safety:
These valves are used where there is vital importance in the system.
VBCD DE A CC series are ideal when other models can not operate properly. If the control valve is closed center, this valve will be a good choice.

Double overcenter valve, VBCD DE A CC , 20 L/min, G 1/4″ , VBCD 1/4 DE A CC V0389

theplanmaster — Thu, 30 Jun 2022 06:49:35 +0000

DOUBLE OVERCENTER VALVE FOR CLOSED CENTER
VBCD 1/4 DE A CC – V0389
Overcenter valves have great importance in hydraulic systems and have following features:
Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.
Load holding:
Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.
Load control:
Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.
Load safety:
These valves are used where there is vital importance in the system.
VBCD DE A CC series are ideal when other models can not operate properly. If the control valve is closed center, this valve will be a good choice.

Double overcenter valve, VBCD DE A FLV , 40 L/min, G 3/8″ , VBCD 3/8 DE A FLV V0422/FLV

theplanmaster — Thu, 30 Jun 2022 06:49:34 +0000

DOUBLE OVERCENTER VALVE
VBCD 3/8 DE A FLV – V0422/FLV
Overcenter valves have great importance in hydraulic systems and have following features:
Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.
Load holding:
Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.
Load control:
Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.
Load safety:
These valves are used where there is vital importance in the system.
VBCD DE A FLV series overcenter valves are used to control actuator’s movement and block in both directions. Pressure is adjustable and sensitive. They can be used on crane booms. Standard pressure setting is 320 bar.

Double overcenter valve, VBCD DE A FLV , 60 L/min, G 1/2″ , VBCD 1/2 DE A FLV V0432/FLV

theplanmaster — Thu, 30 Jun 2022 06:49:34 +0000

DOUBLE OVERCENTER VALVE
VBCD 1/2 DE A FLV – V0432/FLV
Overcenter valves have great importance in hydraulic systems and have following features:
Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.
Load holding:
Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.
Load control:
Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.
Load safety:
These valves are used where there is vital importance in the system.
VBCD DE A FLV series overcenter valves are used to control actuator’s movement and block in both directions. Pressure is adjustable and sensitive. They can be used on crane booms. Standard pressure setting is 320 bar.

Double overcenter valve, VBCD DE FL , 60 L/min, G 1/2″ , VBCD 1/2 DE FL V0434

theplanmaster — Thu, 30 Jun 2022 06:49:33 +0000

DOUBLE OVERCENTER VALVE
VBCD 1/2 DE FL – V0434
Overcenter valves have great importance in hydraulic systems and have following features:
Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.
Load holding:
Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.
Load control:
Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.
Load safety:
These valves are used where there is vital importance in the system.
VBCD DE FL series overcenter valves are used to control actuator’s movement and block in both directions. Pressure is adjustable and sensitive. They can be used on crane booms. Standard pressure setting is 320 bar.

Double overcenter valve, VBCD DE FL , 40 L/min, G 3/8″ , VBCD 3/8 DE FL V0424

theplanmaster — Thu, 30 Jun 2022 06:49:31 +0000

DOUBLE OVERCENTER VALVE
VBCD 3/8 DE FL – V0424
Overcenter valves have great importance in hydraulic systems and have following features:
Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.
Load holding:
Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.
Load control:
Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.
Load safety:
These valves are used where there is vital importance in the system.
VBCD DE FL series overcenter valves are used to control actuator’s movement and block in both directions. Pressure is adjustable and sensitive. They can be used on crane booms. Standard pressure setting is 320 bar.

Double overcenter valve, VBCD DE , 50 L/min, G 1/2″ , VBCD 1/2 DE V0430

theplanmaster — Thu, 30 Jun 2022 06:49:30 +0000

DOUBLE OVERCENTER VALVE
VBCD 1/2 DE – V0430
Overcenter valves have great importance in hydraulic systems and have following features:
Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.
Load holding:
Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.
Load control:
Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.
Load safety:
These valves are used where there is vital importance in the system.
VBCD DE series overcenter valves are used to control actuator’s movement and block in both directions. Pressure is adjustable and sensitive. They can be used on crane booms. Standard pressure setting is 320 bar.

Double overcenter valve, VBCD DE , 105 L/min, G 3/4″ , VBCD 3/4 DE V0431

theplanmaster — Thu, 30 Jun 2022 06:49:30 +0000

DOUBLE OVERCENTER VALVE
VBCD 3/4 DE – V0431
Overcenter valves have great importance in hydraulic systems and have following features:
Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.
Load holding:
Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.
Load control:
Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.
Load safety:
These valves are used where there is vital importance in the system.
VBCD DE series overcenter valves are used to control actuator’s movement and block in both directions. Pressure is adjustable and sensitive. They can be used on crane booms. Standard pressure setting is 320 bar.

Double overcenter valve, VBCD DE , 35 L/min, G 3/8″ , VBCD 3/8 DE V0420

theplanmaster — Thu, 30 Jun 2022 06:49:29 +0000

DOUBLE OVERCENTER VALVE
VBCD 3/8 DE – V0420
Overcenter valves have great importance in hydraulic systems and have following features:
Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.
Load holding:
Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.
Load control:
Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.
Load safety:
These valves are used where there is vital importance in the system.
VBCD DE series overcenter valves are used to control actuator’s movement and block in both directions. Pressure is adjustable and sensitive. They can be used on crane booms. Standard pressure setting is 320 bar.